I am excited to show you guys my Ethan Allen inspired DIY headboard with tutorial! Sorry for being so absent this week, we have had some sickness going around but I still wanted to hop online and share this project I finished last week that I have been so excited about. I ran into a few issues so I am hoping my experience and tips might help you if your thinking of tackling a fabric headboard.
(I may have to break this post up into a couple posts because I have lots of pics and info to share and it will probably be an overload!) I found a headboard I loved at Ethan Allen, but I didn't have the budget for an $800 plus headboard so I decided to make my own. I went to the fabric store and searched for fabric. I knew I wanted it white...but I was nervous about stains! I found a perfect faux leather made of white vinyl (which can be wiped and cleaned) and knew that it would be perfect.
Wanting the corners in a cutout shape, I found a leftover sign in our garage that I cut to use as a template and traced it on the plywood.
After tracing it out, I used my jigsaw and made the corner cuts to get the basic shape I was going for with my headboard.
I decided that since I wasn't going to be adding tufted details that I wanted to make sure and keep the nailhead trim. I have seen lots of different headboards and some of them just seemed too thin after they added the trim. So I used some scrap wood pieces (1x2's) and cut them to fit the edges of the plywood as a border so that when I nailed in the trim, the headboard would still be sturdy and plush looking. I used liquid nails to hold them in place and then used finishing nails and a hammer to secure the border to the plywood. (Most people have nail guns and air compressors and that makes this much easier, but it can still be done without them!)
Here I ran into my 2nd big mistake and didn't realize until it was too late! As I have mentioned before, I do all my DIY projects with limited tools and virtually NO help from my husband. When I told him I was making a headboard he said "why do we need a headboard." lol, you get what I am working with right? Well, I think I could have used another helper to figure out the corners. :) I decided just to piece straight scrap pieces around the corners hoping that if I got it close enough and after I add the foam you won't be able to tell. Well...you can see that the corners aren't nice and tight in a few places where there were gaps in the border, so I would recommend you get more plywood and cut out a 2" corner cutout to add as a border to the corners so it is completely even with no gaps. See photo below for corner mistakes:
At this point I got my 2" foam and cut it out to fit inside the border. I had to piece it around the corners. I attached it using spray adhesive to help it stick and stay where it needed to be!
You'll notice the foam kept puckering up so used more scrap pieces to hold it down until it dried. Notice you make sure and leave your border uncovered. This is so that you have something nice and sturdy to hold your nailhead trim in. Otherwise it won't be able to stick past the foam.
After I got the foam all put where it needed to be, I used low loft quilt batting to cover the entire headboard and stapled it onto the back of the plywood. The low loft batting helps create a seamless effect to the foam and headboard and will make your fabric look much nicer and it isn't too thick so it still allows your trim to attach with ease to the wood border.
Next, I laid out my fabric right side down (in the house)
and I carried the headboard and laid it front side down on the fabric and started stapling it onto the headboard. Make sure you work opposite edges and pull your fabric tight!
I kept checking for bunching to make sure it was staying taut. For the corners, I made sure to cut it into strips to help the corners so the fabric wouldn't gather and bunch. Then I pulled each strip tightly and secured it with several staples.
Here's how it was looking after I got the fabric all stapled on.
After I had it all nice and tight I turned the headboard over to check and make sure there weren't any bunches and to prepare to add the nailhead trim!
Stay tuned for part 2 of my DIY Headboard to see the finishing details.
Want updates and spoilers on projects and ideas? Come like me on facebook , twitter, and Google + to keep up on whats up next!
I'm join these fabulous link parties each week: Flamingo Toes, I heart naptime, Under the table and dreaming, Not your ordinary Recipes, Not just a housewife, The Project Queen, Creating my way to success, Craft Couture, Funky Polkadot Giraffe, Sumos Sweet Stuff, The Kurtz Corner, Krafty Kat, Polly want a Crafter, Blue Cricket Design, Southern Lovely, Ginger Snap Crafts, Women who do it all, Eisy Morgan, Laugh, Love, Craft, Clean and Scentsible, House of Hepworths, Somewhat Simple, The Shabby Creek Cottage, The Shabby Nest, The Speckled Dog, Tatortots & Jello, Simply Designing, Chic on a Shoestring, Just a Girl ,Someday Crafts, Reasons to skip the housework, The Idea Room ,Between U and Me, Home Saavy, Pocket full of pink, , Positively Splendid, Raising 4 Princesses , One Stop Shoppe,Oopsey Daisy, Its Overflowing, The D.I.Y. Dreamer ,Serendipity & Spice, Rae Gun Ramblings, ,Crafty blog stalker , CSI Project, 36th Avenue, Real housewives of Riverton ,The rustic pig , Clever Chicks Blog Hop ,Osie Moats, Sassy Little Lady , Decorated Chaos , Little Mom on the Prairie, Skip to My Lou